|
Can you physically remove the cylinder on the Vaquero? Lube/oil barrel with penetrating oil. Suspend the frame with barrel in vertical position using a padded vise or improvised holder. Insert short sections of brass rod into the barrel behind the bullet until one of the brass rods protrudes into cylinder gap. Then tap on this exposed rod and drive bullet out the muzzle.
REVIEW AND MODIFY your reloading procedures. Incorporate mandatory powder checks or Powder Check/Cop die to prevent future occurrences. You are lucky it was reduced powder charge instead of over/double charge.
__________________
Good shooting and be safe.
LB
|