View Single Post
Old December 7, 2019, 06:29 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 17,202
Well, you don't want to use a manual hammer-driven impact driver, for sure. A hammer drill with a slow speed setting might be acceptable if the screw is severely over-torqued. Just be prepared to replace the screw if heavy-duty means have to be employed to get it out. You might want to check on the availability of that, first.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
 
Page generated in 0.02784 seconds with 8 queries