The Firing Line Forums - View Single Post - Dillon 650 case wedge between position 1 and 2

Seamaster · March 14, 2018, 09:59 AM

Is the shell plate properly adjusted down? I tighten the bolt down by hand all the way until it stops, then back it off about 2 to 3 whiskers(1/8 turn or so) than tighten set screw on the side.

March 14, 2018, 09:59 AM	#6
Seamaster Member Join Date: February 8, 2013 Location: Vermont Posts: 39	Is the shell plate properly adjusted down? I tighten the bolt down by hand all the way until it stops, then back it off about 2 to 3 whiskers(1/8 turn or so) than tighten set screw on the side.