View Single Post
Old December 23, 2019, 06:52 AM   #144
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 6,881
I just ordered a .356 bullet sizing die.

I still would like to know definitively why there is a malfunction--I get obsessed about getting to the root cause of these things--among other things if I don't there will always be that "might be skating on thin ice" doubt even when things are working fine (I suspect you already know that feeling having moved down to the .356 die ). So far, P Flados observation of the case mouth making it past the step-down in the chamber and locking the crimp seems the best explanation, even though the OD in my .357 loaded cases appear to exceed slightly that for .355 loaded bullets.

At first I thought that asymmetric compression of the case rim was due to the case head being slammed back into the bolt face. Now I'm confident it's more likely that it is simply a pathway of least resistance as pressure in the case ramps up--just like the ejector--and thus expanded outward with less resistance initially (the extractor readily shows the outward bending of the claw) while the rest of the case is contained within the bolt fcae wall.
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is online now  
 
Page generated in 0.03231 seconds with 8 queries