View Single Post
Old January 15, 2012, 11:18 AM   #6
cal_h
Junior Member
 
Join Date: January 14, 2012
Posts: 2
looking for info on how to disassemble the bolt on a win-cooey 600

the problem is as above ... one shot fires and several light strikes....... no fire

upon close inspection, the striker part of the bolt has a worn guide pin or dowel
this is allowing the striker part of the bolt out of alignment with the v notch between the two pieces of the bolt ...... my opinion is the striker is hitting and rotating into place with most of the energy gone, this is causing the light strikes and misfires ...... and the occasional good fire

now: how to disassemble the bolt and remove that pin (dowel) for replacement

thanks
cal
cal_h is offline  
 
Page generated in 0.02793 seconds with 8 queries