The Firing Line Forums - View Single Post - It is time. SilencerCo Harvester 300 + Sparrow 22

FrankenMauser · March 3, 2018, 04:41 PM

I figured I'd provide minor feedback, since the Tac-Sol Ascent finally came in.

Fit and finish were surprising when it came out of the box.
Machining and finishing are better than what I've seen in stock photos.
And the wrench that some people have complained fits loosely and skips teeth seemed incapable of such. It was, in my opinion, a perfect fit. There's enough clearance to deal with some minor dirt or residue from shooting, but it still fits extremely well with plenty of engagement on the end cap and thread adapter.

I'll let you know what I think about actual use after the long wait...
(Looks like I'll be lucky to take possession by October. I'm figuring on November.)

March 3, 2018, 04:41 PM	#23
FrankenMauser Senior Member Join Date: August 25, 2008 Location: In the valley above the plain Posts: 13,427	I figured I'd provide minor feedback, since the Tac-Sol Ascent finally came in. Fit and finish were surprising when it came out of the box. Machining and finishing are better than what I've seen in stock photos. And the wrench that some people have complained fits loosely and skips teeth seemed incapable of such. It was, in my opinion, a perfect fit. There's enough clearance to deal with some minor dirt or residue from shooting, but it still fits extremely well with plenty of engagement on the end cap and thread adapter. I'll let you know what I think about actual use after the long wait... (Looks like I'll be lucky to take possession by October. I'm figuring on November.) __________________ Don't even try it. It's even worse than the internet would lead you to believe.