View Single Post
Old July 15, 2017, 01:51 PM   #9
hounddawg
Senior Member
 
Join Date: March 1, 2009
Posts: 2,437
Interesting problem RC, what I would try is this

take a case and paint a band of 750 halfway around the case then finish the band with 800. Pop it into your Annie and start with .5 seconds and let it cool, repeat while increasing the times by .1 seconds until one of the Templaqs melts. Hopefully the 750. If the 800 melts first try another case and rotate it on the Y axis 180 degrees so that the 750 is in the same spot that the 800 was in the first time. If you are getting the case into the same spot each time as far as the spatial relationship of the case to the coil you should be getting consistent results with the same caliber/brand cases
__________________
“How do I get to the next level?” Well, you get to the next level by being the first one on the range and the last one to leave.” – Jerry Miculek
hounddawg is offline  
 
Page generated in 0.03263 seconds with 8 queries