The Firing Line Forums - View Single Post - Review: SSAK-47 Bump Fire Stock for the AK

Silver_Bullet · January 3, 2012, 02:44 PM

Will this work on a Mak-90 stamped receiver that is straight cut in the rear. The Mak-90 is 1.5mm thick vs 1mm on other AK receivers.
Thanks

January 3, 2012, 02:44 PM	#6
Silver_Bullet Junior Member Join Date: January 3, 2012 Posts: 2	Will this work on a Mak-90 stamped receiver that is straight cut in the rear. The Mak-90 is 1.5mm thick vs 1mm on other AK receivers. Thanks