View Single Post
Old November 20, 2000, 02:19 PM   #2
Ledbetter
Senior Member
 
Join Date: February 23, 2000
Location: California USA
Posts: 4,533
B-Square Mount

Hi Dave,

I have a B-Square mount on my Mossberg 590A1, on top of which sits a Trijicon Reflex amber dot sight. The mount has stayed on 50 yard zero through at least 50 slugs and 150 rounds of trap loads. The Mossberg mount replaces the trigger group pin with a bolt that goes through the receiver and secures both sides of the mount to the gun. There is also a longer screw that replaces the extractor screw and secures the mount in front on the left side of the receiver. You must have the same HMO as I do.

Regards and good luck.

Edited to add that the saddle mount can be removed from the shotgun without removing the scope from the mount and that the Weaver rail forms a hole about 3/8" square through which you can see the front bead.

[Edited by Ledbetter on 11-20-2000 at 06:56 PM]
Ledbetter is offline  
 
Page generated in 0.03357 seconds with 8 queries