View Single Post
Old November 12, 2010, 12:42 AM   #586
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 736
More info on 10 and 8 gauge slugs. The guy got some
made with deep hollowbase, 10ga 900gr, 8ga 1100gr.
He will make them for a buck each.
Bob Bigando in AZ. (bobiano at yahoo.com)
Good price as they are nice hard shiny slugs.
For seals for 10 and 8 gauge you can get regular
card seals and nitro fiber wads, but plastic seals
will do better, about a 100 fps in the faster loads.
Plastic seals for 10 ga are at BPI, called - X10X.
For 8ga I cut bottom seal part off of the 8ga wadcup
that BPI has. For extended accuracy in smooth bores
you can screw the seals on to the slugs and that
will make the overall projectile more front heavy.
Use these in loads with slower RE17 that fills
case so no fiber wads are need.Just seal and slug.ED

__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.03134 seconds with 8 queries