View Single Post
Old May 2, 2009, 11:19 PM   #458
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 736
Here is picture of a NEF breach barrel section that I threaded
monoblock style for a .585" cal barrel, to make a NEF 585HE.
It goes on a SB2 10-12ga alloy, super strong frame. Its
OD is 1.210" and the barrel that screws into it will be tapered
to match contour and it will be 1.00" at muzzle, at 32" long.
I know these are strong enough as my 8GA FH testing shows..
Later will do couple more with heavy barrels for 28GA FH, etc,
as all the break action 28 gauges I've looked at have too
thin of muzzles for our slower, powder loads.I'll have 3 of these
that fit one SB2 frame I have here.This makes switch barrels
big power fun.Ed.

__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.03225 seconds with 8 queries