The Firing Line Forums - View Single Post - Custom rifle 6.5-06.

taylorce1 · July 19, 2014, 08:09 AM

It's a simple one pass process to neck up .25-06 brass, and it doesn't require any neck turning. It's what I used with my 6.5-06 I had. There is commercial brass available if you need properly stamped brass, it cost about $2 a piece from Quality Cartridge. Midwa carries it and the head stamp will read 6.5-06 A - Square since they are the ones who got SAAMI to standardize the round.

Hooligan1 I'll get you email sometime today.

July 19, 2014, 08:09 AM	#15
taylorce1 Senior Member Join Date: November 18, 2005 Location: On the Santa Fe Trail Posts: 8,237	It's a simple one pass process to neck up .25-06 brass, and it doesn't require any neck turning. It's what I used with my 6.5-06 I had. There is commercial brass available if you need properly stamped brass, it cost about $2 a piece from Quality Cartridge. Midwa carries it and the head stamp will read 6.5-06 A - Square since they are the ones who got SAAMI to standardize the round. Hooligan1 I'll get you email sometime today. __________________ NRA Life Member