Thread: .270 Reloading
View Single Post
Old December 26, 2011, 09:57 PM   #6
SFW
Senior Member
 
Join Date: June 23, 2010
Location: The Republic of Texas
Posts: 124
So far, the load that my Remington 700 on .270 has liked the best has been 46.0 grains of Varget topped with a Nosler 130 grain ballistic tipped boat tail bullet. I use either Winchester or Hornady brass with CCI 200 primers. My first run of these gave me a .335 inch group at 100 yards.

I'va also had good experiences with Hornady 130 grain SSTs with 45.5 grains of H380. I used CCI 250 primers for this load. Just be ready for some muzzle flash with this load. Neither of my loads are max. I usually start in the middle of the road and work from there.
SFW is offline  
 
Page generated in 0.02399 seconds with 8 queries