|
When you are doing your powder adjustment make sure you run the full stroke to include primer seating, even if you are not seating a primer. I noticed it made a difference in consistency. After every adjustment I dump one or two cases without checking on the scale then check one on the scale. I have never noticed a difference with or without belled cases. Once you get close to the grains you want take your time and make very small adjustments. I use a lot of BE and have never had the swings you are seeing. One last thing, make sure you are using the small powder bar and the top block is installed correctly. Good luck!
__________________
Seams like once we the people give what, at the time, seams like a reasonable inch and "they" take the unreasonable mile we can only get that mile back one inch at a time.
No spelun and grammar is not my specialty. So please don't hurt my sensitive little feelings by teasing me about it. 
|