View Single Post
Old March 2, 2012, 07:43 PM   #3
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,401
The firing pin retaining pin was difficult to remove. I bent my brass punch in the process of removing it. I also had to punch the firing pin itself out. What I found was galling on the firing pin where it contacts the firing pin retainer. Looks like I need to replace both these parts. Bolt and extractor are OK.
chiefr is offline  
 
Page generated in 0.04713 seconds with 8 queries