The Firing Line Forums - View Single Post - Problem Installing Older Style Ruger Grips On GP100

DukeONuke · October 14, 2011, 03:49 PM

Got IT! Knocked the pin back out of the tang hole with a punch and hammer, then lubed the hole with spray Lubricant and pounded the pin back in the hole. Much easier with the oiled/non-dry hole.

October 14, 2011, 03:49 PM	#2
DukeONuke Junior Member Join Date: October 14, 2011 Posts: 2	Got IT! Knocked the pin back out of the tang hole with a punch and hammer, then lubed the hole with spray Lubricant and pounded the pin back in the hole. Much easier with the oiled/non-dry hole.