“The puller warnings say not to use the puller when the primer is not seated”
I remember someone almost blew the head off their handle, they blamed the shell holder in the inertia puller. Direction and keeping up with two thought at once, the inertia puller is a puller, as in the hammer stops suddenly, abruptly and all at once, with nothing in front of the bullet it continues forward, thus, the inertia puller pulls bullets, back to not being fair, all my primers are installed in the rear/head of the case, installing a case in an inertia puller will not pull primers, if anything it will seat the primer, and there is the problem with pulling bullets from cases with high primers, seating the primer with sudden stops can set the primer off under some conditions.
F. Guffey
|