The Firing Line Forums - View Single Post

ShootingNut · April 12, 2007, 05:52 AM

Thanks, I will check those things out.
Part way through loading, I did back out the die a little, as it seems the 155
LSWC where setting into the case mouth to easily. A "loose" seated bullet is not good either is it? So far, I see no damage to the casings due to over flaring. Between flaring properly, and getting the full powder cycle, it sounds as if one has to hit the happy medium.
regards

April 12, 2007, 05:52 AM	#6
ShootingNut Senior Member Join Date: December 27, 2006 Location: Wisconsin Posts: 1,475	benedict1 Thanks, I will check those things out. Part way through loading, I did back out the die a little, as it seems the 155 LSWC where setting into the case mouth to easily. A "loose" seated bullet is not good either is it? So far, I see no damage to the casings due to over flaring. Between flaring properly, and getting the full powder cycle, it sounds as if one has to hit the happy medium. regards