View Single Post
Old September 7, 2012, 10:18 PM   #5
mudlark
Member
 
Join Date: April 1, 2008
Posts: 39
ronz

Try the LLA as is before you go trying to improve on it. I thank the day I went from the Size/Lube process to Tumble Lubing. Did 100 .357s last night in minutes. Granted it is a bit thick as is. I drip it into the bowl first and roll the bowl to coat, then add bullets. That way a couple bullets don't get a "heavy dose". I err on the VERY light side and have ZERO problems with leading or anything else. If you feel you must thin the stuff, just pour a small amount into another similar container, (I've used empty nasal spray containers) and add some mineral spirits. I've used 70/30 with good results (as far as making the application easier). Don't get nuts about having to stand all your bullets on end. I just spread them on some wax paper and let them "dry" for a day or two. While they do remain a bit "tacky", it does not affect my loading in the least.

Good luck with your casting. Nothing like doing some awesome groups with your own bullets. You're going to enjoy it!
mudlark is offline  
 
Page generated in 0.03748 seconds with 8 queries