|
Remove forearm.
Knock out pin at gas port.
Remove action spring guide and action spring.
Remove barrel nut. There is a special wrench for this but I have used an adjustable or vice grips in a pinch.
Remove barrel. Pulls right out when barrel nut is removed.
Remove charging handle pin. This pin is located just behind the charging handle. If you turn the gun upside down and look through the magazine well at the bottom of the bolt, you will see the pin. It goes through the bolt and holds the charging handle in place. I've found it easier to knock out from the topside which sometimes means removal of the scope. It is usually pretty tight and can be a buggar to get out.
Once the pin is removed the charging handle will pull out and the bolt/action bar can be removed from the action.
Hope this helps and good luck....
|