|
Hello, BDM 9MM..If that truly is an original 66'...well..you guys know what those things are worth. Only black powder should be used due to that old toggle action & brass frame. I don't think you will find any modern made .44 rimfire..but Dixie Gunworks does sell .44 Henry cases..with an off-set chamber in head to take .22 blank. This is the primer..firing pin hits rim of the .22. case is filled with B.P. & you will need a "heeled" bullet (a .22 rimfire is of this design..smaller dia. "heel" or shank fits inside case, bullet dia. is same as case dia...might posssibly get away with a hollow-base design. Oh, you won't be able to load thru magazine..that .22 rim has to be lined up with pin..so it's single-shot only. Best of luck!
|