View Single Post
Old September 8, 2012, 06:35 PM   #6
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
You can stone the sear and cocking piece to improve the trigger pull a lot. Do not mess with the sear spring, and do not do more than light stoning to the sear/cocking piece. If you take too much off you could have a sear reset failure and a very dangerous condition.

Always make sure the safety will work properly after any sear or cocking piece work.

Jim
James K is offline  
 
Page generated in 0.03456 seconds with 8 queries