View Single Post
Old October 4, 2017, 11:57 AM   #5
Senior Member
Join Date: January 3, 2017
Posts: 1,583
He is going to replace the barrel with a larger caliber gun barrel and sleeve it to fit his 22.
Since the new barrel may not be using the same thread diameter he was asking if it was the same.
The firing pin is already in the correct position in relation to the center of bore.
As long as the threads are the same pitch and diameter he will end up with a heavier barrel on his 22 with a sleeve that keeps it a 22..
ShootistPRS is offline  
Page generated in 0.02841 seconds with 8 queries