View Single Post
Old October 17, 2017, 04:39 PM   #33
Senior Member
Join Date: September 2, 2010
Location: Plainview , Long Island NY
Posts: 2,975
For spot bedding they are the areas , a complete bed is 1" forward of the lug all the way back to the rear post , uses more bedding compound , harder cleanup . Is the barrel free floated ? What is the torque setting on your rifle. My stock was free floating HS precision stock , the torque setting is 65" lbs. on both stock screws , with the rifle in place I put electrical tape around the barrel about 3" in to level the barrel , also placed a register mark by using masking tape on the end of the stock to match up with the tape & mark on the lower part of the barrel , just to keep everything squared up when setting the barrel & action into the stock .
cw308 is offline  
Page generated in 0.03177 seconds with 8 queries