View Single Post
Old February 15, 2009, 02:34 PM   #3
dirty magazine
Member
 
Join Date: November 2, 2008
Posts: 45
Quote:
Regarding the stuck mainspring housing- are you pulling the latch out all the way? It will hang up on the frame and block the magazine if you don't extend it completely. The latch should extend almost flat, and then spring back slightly.
This might be a bit confusing- the latch needs to be extended so that the other end of the latch will clear the frame. As soon as it is extended, it will block the magazine until the MSH is tilted out of the frame.
dirty magazine is offline  
 
Page generated in 0.04386 seconds with 8 queries