View Single Post
Old May 4, 2007, 12:31 AM   #235
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 751
I only got a few brass cases from RMC to test.NEF chamber will take
the 2 & 7/8" RMC brass. It took our case cut back to 3.00".
To cut our case back is too bothersome if you have to adapt to
small primers. Or do a lot of work on the gun to fire big primers.
So RMC is easier. Nef came with 3" chambers and 3" plastic is about 2.6" long when crimped. I found its easier to start with plastic, get a
simple shotgun die for press and a roll crimper, 10 cent 3" cases, and
you can get real hairy loads with 600gr Dixie slugs in 3" using
4759 and VV N110 powder. The 7383 powder also and it can go
with heavier slugs. Nef Ultra slug gun is $225, and with rest of
the stuff, $600 total should do it.Rcbs is supposed to have
dies for regular big presses.Ed
__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.03638 seconds with 8 queries