View Single Post
Old March 3, 2013, 07:04 PM   #4
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 2,101
Well since I cannot manage to get a decent picture with my camera, I can at least point you to the discussion on the 452-200 below.

Mihec 452-200 Cramer HP - great mold

I did find out that the alloy I poured these with, 1.75/1.75/96.5 didn't expand at 10yds in the bucket of dirt I have been using to test with. I had them loaded over 5.5grs of Salut or the Russian Unique which ever you want to call it by.

That really isn't a bad thing as they did penetrate almost to the bottom of the bucket with it laying on it's side, shooting into the top. I had also originally made this alloy up to use in my 41, and 44.

I will pour up some more using the 1.5/1.5/97 I had used before which should give them great expansion. Of course these might work well for some of the smaller hogs we sometimes get up close and personal with as well.
__________________
LAter,
Mike / TX
Mike / Tx is offline  
 
Page generated in 0.02992 seconds with 8 queries