The Firing Line Forums - View Single Post

jar · May 18, 2019, 02:19 PM

It's worth checking. But as I have said repeatedly the main issue is not trigger weight and all the other items mentioned would remain.

Even if the gauge is off the same gauge was used for all the samples. The ratios and relative trigger pulls should remain the same with the LCP being the lightest of the samples regardless of the absolute reading.

AbE: Checked the scale against known weights of my S&W 469 and 5906.

The scale shows the 469 at just over 1 pound 10 ounces and the 5906 at 2 pounds 6 ounces. Those are very close to the published weights for the two models. Also checked against the Star UltraStar so pretty sure the gauge is not too far off.

May 18, 2019, 02:19 PM	#84
jar Senior Member Join Date: March 8, 2001 Location: Deep South Texas Posts: 1,156	It's worth checking. But as I have said repeatedly the main issue is not trigger weight and all the other items mentioned would remain. Even if the gauge is off the same gauge was used for all the samples. The ratios and relative trigger pulls should remain the same with the LCP being the lightest of the samples regardless of the absolute reading. AbE: Checked the scale against known weights of my S&W 469 and 5906. The scale shows the 469 at just over 1 pound 10 ounces and the 5906 at 2 pounds 6 ounces. Those are very close to the published weights for the two models. Also checked against the Star UltraStar so pretty sure the gauge is not too far off. __________________ To be vintage it's gotta be older than me! Last edited by jar; May 18, 2019 at 02:50 PM.