The Firing Line Forums - View Single Post

CrustyFN · May 2, 2007, 06:02 AM

What is your OAL on the 124 FP? The 124 FP's I used were wider farther out than a RN. I had to take one and keep seating it until it would chamber, then I re-seated the rest and the problem was gone. Take the barrel out of your gun and seat the bullet a little at a time until it drops all the way into the barrel on it's own. Tip the barrel up and it should fall back out on it's own. Thats where you want it to be. I think I ended up with a OAL of 1.030. I will check when I get home and let you know. I cut back to 4 grains of Titegroup on those. I think that was .32 on the pro auto, check it on your scale.
Rusty

May 2, 2007, 06:02 AM	#2
CrustyFN Senior Member Join Date: June 4, 2006 Location: West Virginia Posts: 2,258	What is your OAL on the 124 FP? The 124 FP's I used were wider farther out than a RN. I had to take one and keep seating it until it would chamber, then I re-seated the rest and the problem was gone. Take the barrel out of your gun and seat the bullet a little at a time until it drops all the way into the barrel on it's own. Tip the barrel up and it should fall back out on it's own. Thats where you want it to be. I think I ended up with a OAL of 1.030. I will check when I get home and let you know. I cut back to 4 grains of Titegroup on those. I think that was .32 on the pro auto, check it on your scale. Rusty __________________ I don't ever remember being absent minded.