The Firing Line Forums - View Single Post - Modifying a NY AR to take a Normal Capacity magazine?

Scorch · May 17, 2022, 03:33 PM

I have modified ARs coming out of NJ, NY and CA (I am in WA, where removing the magazing restricting device is NOT illegal). The modifications I performed are removing the magazine lock and removing the "bullet buttons" that were common a few years ago. It entails removing the device and replacing the locking magazine latch assembly with a standard magazine latch assembly, about $30 worth of parts and 10 minutes at the bench.

May 17, 2022, 03:33 PM	#5
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,249	I have modified ARs coming out of NJ, NY and CA (I am in WA, where removing the magazing restricting device is NOT illegal). The modifications I performed are removing the magazine lock and removing the "bullet buttons" that were common a few years ago. It entails removing the device and replacing the locking magazine latch assembly with a standard magazine latch assembly, about $30 worth of parts and 10 minutes at the bench. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services