The Firing Line Forums - View Single Post

dahermit · November 17, 2017, 07:46 PM

I have a Browning H.P. that does not have a very good trigger. I removed the magazine safety but there it still has an irritating "hitch" (a felt "click" in the travel) in the trigger pull before it lets off. I had an inexpensive 1911 fixture (used a steel shim to set the depth of the stoning) at one time that gave my circa seventies .38 Super Colt Combat Commander a pull that is the equal to that of my XSE Colt Commander .45 ACP. I was hoping to find an inexpensive fixture to do the same thing to my HP, but all I can find is the expensive fixture as sold by Brownell's...which is way too expensive for doing a one-time job.
So, does anyone know of a stoning fixture for the Browing HP somewhere that does not cost an arm and a leg?

November 17, 2017, 07:46 PM	#1
dahermit Senior Member Join Date: October 28, 2006 Location: South Central Michigan...near Posts: 6,501	Browning HP stoning jig? I have a Browning H.P. that does not have a very good trigger. I removed the magazine safety but there it still has an irritating "hitch" (a felt "click" in the travel) in the trigger pull before it lets off. I had an inexpensive 1911 fixture (used a steel shim to set the depth of the stoning) at one time that gave my circa seventies .38 Super Colt Combat Commander a pull that is the equal to that of my XSE Colt Commander .45 ACP. I was hoping to find an inexpensive fixture to do the same thing to my HP, but all I can find is the expensive fixture as sold by Brownell's...which is way too expensive for doing a one-time job. So, does anyone know of a stoning fixture for the Browing HP somewhere that does not cost an arm and a leg?