The Firing Line Forums - View Single Post - Marking Re-Formed Brass

Archie · January 7, 2017, 06:44 PM

I just keep that re-formed brass separate and in its own marked box.

Happily I only have one rifle for which I have to 'make' brass.

I have a pile of .45 Auto Rim. Some of the cases are loaded light for a Webley (I didn't cut it, it was that way when I found it!) Those cases stay in their own boxes with clear markings as well.

(The bulk get used in a Model 25 S&W revolver. A 255 SWC at 800 fps +/- is rather serious.)

January 7, 2017, 06:44 PM	#21
Archie Senior Member Join Date: May 27, 2000 Location: Hastings, Nebrasksa - the Hear Posts: 2,209	Fairly simple for me... I just keep that re-formed brass separate and in its own marked box. Happily I only have one rifle for which I have to 'make' brass. I have a pile of .45 Auto Rim. Some of the cases are loaded light for a Webley (I didn't cut it, it was that way when I found it!) Those cases stay in their own boxes with clear markings as well. (The bulk get used in a Model 25 S&W revolver. A 255 SWC at 800 fps +/- is rather serious.)