The Firing Line Forums - View Single Post - problems with inconsistent charge weights

MEATSAW · January 23, 2014, 04:04 PM

Yes I also deal with leakage from the fine, spherical powders like TAC, Accurate #5, etc. I usually get consistent charge weights once I get it dialed in, but there is definitely leakage. Extruded powders do not leak and are still drop consistent charges. If all powders were shaped like IMR-8208 I'd be a happy camper!

January 23, 2014, 04:04 PM	#5
MEATSAW Senior Member Join Date: May 1, 2009 Location: Burnet, TX Posts: 727	Yes I also deal with leakage from the fine, spherical powders like TAC, Accurate #5, etc. I usually get consistent charge weights once I get it dialed in, but there is definitely leakage. Extruded powders do not leak and are still drop consistent charges. If all powders were shaped like IMR-8208 I'd be a happy camper!