View Single Post
Old October 15, 2013, 12:18 PM   #16
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,171
As others mentioned you need to start with a block and paper. Use some dowels and other shaped wood to get into radiuses. I would start with 600 and work your way to crocus cloth or 1200 before you start with a polishing wheel. Then work your way through the 3 rouges. Final polish with a cheese cloth and something like simichrome or flitz. You will need to disassemble everything and make sure all the excess rouge is removed with something like mineral spirits. Personally I wouldnt do it.
Concentrated power is not rendered harmless by the good intentions of those who create it.
Milton Freidman
"If you find yourself in a fair fight,,,
Your tactics suck"
- Unknown
BoogieMan is offline  
Page generated in 0.05736 seconds with 7 queries