View Single Post
Old March 16, 2013, 03:29 PM   #9
Senior Member
Join Date: September 19, 2008
Posts: 4,678
FWIW, if the case and/or projectile are a (very) slight crush fit in the chamber (fore/aft), there will be no excess headspace.

There does, however, need to be something (a chamber step or neck) to crush against.

Close attention does have to be paid to case length, though - since cases usually lengthen with firing.

If the correct AOL is determined, it's fairly easy to make a try gauge from sheet metal for the cases or loaded rounds.

PetahW is offline  
Page generated in 0.03783 seconds with 7 queries