View Single Post
Old March 12, 2013, 08:00 PM   #8
Senior Member
Join Date: January 9, 2013
Posts: 278
The ejector doesn't have a hold on the brass in the first place. The extractor does that. The ejector is what knocks the shell loose from the extractor as the bolt face passes it near the end of the rearward stroke. If the extractor is pulling the empty out of the chamber it is doing its duty. Check the ejector and spring. It is mounted on the inside of the receiver on the lower left side.
oldgunsmith is offline  
Page generated in 0.03415 seconds with 7 queries