View Single Post
Old February 13, 2013, 08:33 AM   #4
Senior Member
Join Date: January 24, 2013
Location: NC
Posts: 545
If you can find the brass for a reasonable price then thats the way to go. However, it's not difficult to first reform by simply running it through a sizing die, and then fire form by shooting a fire forming load.

When 7TCU brass came out it was about 2 or 3 times the cost of 223 brass so I have very little actual headstamped 7TCU and a ton of reformed 223.

Depending on your chambers you may or may not need to neck turn or ream your reformed brass.
eldermike is offline  
Page generated in 0.08791 seconds with 7 queries