View Single Post
Old February 12, 2013, 06:56 PM   #7
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,139
You may have more of a problem then what I'm talking about if your pillar is broken loose from your stock and now you have nothing to epoxy to. You might have to rebuild that part of your stock and glassbed as well as pillar bed like alex0535 mentioned.
What pillar bedding I do is with a stock that has never broke loose, and I take a dremel type tool (I have one of those expensive flexshaft tools) and use a cutting wheel to make grooves to the outside of the nipple so the epoxy has some "bite", and I drill the screw hole out to the diameter of the nipple, and it works well and it's cheap, and it's steel so it ain't going no where! ( it was Clark, or Picher, or someone that pointed me in that direction)
Thanks for coming!

Last edited by hooligan1; February 13, 2013 at 01:58 PM.
hooligan1 is offline  
Page generated in 0.03488 seconds with 7 queries