View Single Post
Old February 12, 2013, 01:53 PM   #8
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981

You have that one backward.
The old standard was "If it rotates oil it, if it slides, grease it".

I personally don't hold to that and will use grease on any application.
Not the way I was instructed way back when I started shooting double guns - it was grease on the hinge pins and knuckles or trunions and oil for the ejectors; been doing that way for 35 years with no issues

Now on semi pistols, I use a little grease on the rails
BigD_in_FL is offline  
Page generated in 0.06441 seconds with 7 queries