View Single Post
Old January 15, 2013, 10:52 PM   #2
Senior Member
Join Date: October 13, 2009
Location: nw wyoming
Posts: 1,025
You could also measure the chamber length and trim the cases so that they are only .003-.004 under that length.
Everything I've checked, that means the case is going to be longer than factory specs (over max), so it has to be for THAT gun.

You dont have to trim to min, but you need to trim so that they are all the SAME length.
reloader28 is offline  
Page generated in 0.03567 seconds with 7 queries