View Single Post
Old January 15, 2013, 11:18 AM   #5
James K
Join Date: March 17, 1999
Posts: 24,189
If you have to drill them out, grind off the top where the screwdriver slot is because the slot edges could throw the drill off center. And make sure you use a good drill press and the right size drill; if you cut into the frame threads you will have to buy extra large bushings and you might not be able to get those in the size your grips call for.

Jim K
James K is offline  
Page generated in 0.03382 seconds with 7 queries