View Single Post
Old December 7, 2012, 01:00 PM   #6
Senior Member
Join Date: January 19, 2011
Location: In the first foothills of the Cascade mountains outside Portland OR
Posts: 156
If you are drilling out a stripped headed screw a drill bit with left handed threads works great. Often the bit will hang up and back the screw right out. If you drill a small pilot hole dead center and then follow with a larger bit this is the most likely outcome. Left handed twist bits are available from good hardware stores.
20thru45 is offline  
Page generated in 0.04312 seconds with 7 queries