View Single Post
Old December 7, 2012, 12:22 AM   #2
Junior Member
Join Date: September 23, 2012
Posts: 11

The stock was cracked in several places, and wood was ruined in several other places. So it was reinforced with epoxy and steel rods. I then refinished it with chestnut stain and marine finish.

The bluing was bad, so that was redone with Oxpho Blue (first time I did a cold blue)

I believe it is now fully functional.
JTofSD is offline  
Page generated in 0.05544 seconds with 7 queries