Thread: AR lube
View Single Post
Old November 16, 2012, 08:25 PM   #17
Senior Member
Join Date: November 24, 2011
Location: West Palm Beach, FL
Posts: 337
Yep, I usually let my gun sit under a lamp for a few minutes to heat up or hit it with a hairdryer/heat gun if needed. Then I apply some liquid, brush it in lightly with a cleaning brush if necessary, and then wipe the crud and excess off. I reapply while it's still warm, let it soak in and cool for a few minutes, and then wipe off the excess and reassemble. Shouldn't take longer than 5-10 minutes, and you'll be amazed at how much will weep back out of the metal when it warms up when firing. On my AR's I'll sometimes add a drop into the gas key and holes in the right side of the BCG between strings of fire if necessary, but mostly I just keep on shooting and let the Frog Lube do it's stuff.
Cool - I look forward to trying it out. And it smells good too! Thanks.
mitranoc is offline  
Page generated in 0.04064 seconds with 7 queries