View Single Post
Old November 5, 2012, 02:35 AM   #59
Metal god
Senior Member
 
Join Date: April 10, 2012
Location: San Diego CA
Posts: 3,385
Well I just got done sanding the heck out of the inside of the barrel chanel of my stock When I was done I had given the barrel an extra 1/6 to 3/32 of space all the way around . I think this will work . It definitely has a bigger gap between the barrel and the stock and is is still ridgid when handling the rifle . I used 1/2" flexable ruber conduit as a sanding block . Started with 80gr to 150gr to 220gr to 320gr . Sorry I forgot to take a before picture. Trust me the stock was almost touching the barrel in some areas .


__________________
Tolerate- allow the existence, occurrence, or practice of something that one does not necessarily like or agree with , without interference.
If you have some time IMO this is worth a listen/watch but it takes a few minutes to really get going .
https://www.youtube.com/watch?v=04wyGK6k6HE or a picture of Mohamed https://www.youtube.com/watch?v=1VwpwP_fIqY
Metal god is offline  
 
Page generated in 0.05829 seconds with 7 queries