View Single Post
Old October 11, 2012, 10:27 AM   #7
Join Date: July 17, 2012
Posts: 51
I stoned and polished all general contact surfaces. Stoned & polished the sear. Also set the hammer up on a surface grinder [I work as a Tool & Die maker] to remove about .006 from the engagement surface- to reduce the lenght of trigger pull. Reduced thickness of trigger spring by about 10% for now. It is really pretty decent now, although not as slick as my Rugers.
magmax is offline  
Page generated in 0.03675 seconds with 7 queries