Thread: Colt Wedge
View Single Post
Old October 10, 2012, 04:44 PM   #4
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 530
What you have is a late bolt drop and has nothing to do with the hand spring. The bolt should ideally drop into the lead prior to the cylinder cutout. If it drops right into the cutout it will work when slow cycled but with rapid cocking shoot past the cutout. The fix is to remove a tiny bit from the leg of the bolt that rides on the cam causing the bolt to drop a bit earlier.
denster is offline  
Page generated in 0.03834 seconds with 7 queries