View Single Post
Old September 28, 2012, 11:54 AM   #2
James K
Join Date: March 17, 1999
Posts: 24,159
It looks like you have about got it. The follower needs to be at a lesser angle (which means the feed lips need more bend, but if you get the bolt to clear it should work. If not, Gun Parts Corp. ( has repros, stock #153170, at about $40.

There are sites with takedown instructions, and a video on takedown here:

The guy in the video uses a screwdriver to push in the spring bushing; PLEASE use a non-marring brass or plastic tool. And PLEASE remove the grips before working on the gun; they are VERY fragile and one drop will destroy them.

Jim K
James K is offline  
Page generated in 0.03220 seconds with 7 queries