View Single Post
Old September 15, 2012, 09:43 PM   #3
Bill DeShivs
Senior Member
Join Date: April 7, 2006
Posts: 9,090
No, you can resurface them with 240-320 grit wet/drt silicon carbide sandpaper. Tape the paper to a flat surface, and lay the stone on it. Rub in a circular motion. Doing this wet with detergent & water helps considerably.
Stones can be cleaned by scrubbing with water, Barkeeper's Friend scouring powder, and a stiff brush. Wear rubber gloves.
Bill DeShivs, Master Cutler
Bill DeShivs is offline  
Page generated in 0.03662 seconds with 7 queries