View Single Post
Old May 22, 2012, 12:57 PM   #5
Junior Member
Join Date: May 16, 2012
Posts: 4
I would attach a piece with slots cut in them as far as the lining glue alone will not work it will peel from the edges down the road stitching is required

first attach via sewing the 2 drop down panels on the outside of the belt then to cove up stitching first glue with contact cement on both lining and attached piece let them dry 45 to 50 min and then apply the 2 pieces being careful at this point there's no removing once there touching most important part of gluing is letting contact cement sit at 50 min before putting them together
J. Russell Leather
jrussellleather is offline  
Page generated in 0.03004 seconds with 7 queries